No Slip Skid Safe System™
For Tile, Porcelain, Brick or Limestone

Description

This unique No Slip Kit turns slippery ceramic/porcelain tiles, brick, marble or limestone floors into non-slip floors with real traction. The anti slip coating dries into clear and rough finish with a minimal change of appearance. No more slipping & sliding on slippery tiles and wet slick floors. Our no slip products have been successfully used for many years in commercial and residential settings in the United States and many other contries around the world.  


No Slip Skid Safe System™ For Tile, Porcelain, Brick or Limestone makes ceramic, or porcelain tiles anti-slip. These tiles are normally hard to treat with durable anti-slip coating/finish, but our proprietary technology allows just that.
 
Use Our No Slip Skid Safe System™ on floors that get wet and slippery:

  • Outdoors -  decks, walkways, ramps, stairs, around swimming pools, driveways, etc.
  • Indoors -  swimming pool decks, locker rooms, kitchens, bathrooms, showers, etc.

Main Benefits

1- ND AGGREGATE™ is extremely hard and durable mettalic grit. Heavy foot traffic, even weight of cars is not going to crush it. ND AGGREGATE™ provides unmatched traction and is vastly superior in terms of non-slip/anti-slip properties and durability over any plastic/sand type aggregates. Wet Dynamic Coefficient of Friction (DCOF) for No Slip Skid Safe System™ is 0.61. 

2- SKID SAFE Water Based Sealer/Finish holds the aggregate and features extremely high skid resistance. This allows for the creation of real non-slip/anti-slip coating. Floor finishes, including epoxies without this high slip resistance, even when used with anti-skid additive, will still be slippery. SKID SAFE is available in a Regular Gloss version, or a Satin/Matte version.

3- Ease of use: No mixing, no special equipment, no difficult application, no unpleasant fumes, easy cleanup. Do-it-yourself, or hire a contractor if you wish.

4- Safety: Our liquids are water based, build with consumer and environment in mind. VOCs are very low and compliant even in California.

5- Longevity: With proper care and maintenance you will not need to strip and re-do the No Slip Skid Safe System™ application for at least 5 years! Please read and follow our Directions.

What is included in the Kit

1- SUPER BOND & CLEAN™ -  cleans and prepares the tiles, brick or limestone for perfect bond with SKID SAFE. NOTE: Do not use this product if the floor has already been sealed, and the sealer/finish is in a good, sound condition. Instead of this KIT, order NO SLIP SKID SAFE SYSTEM™ KIT for Vinyl, Wood, Metals and Previously Sealed Surfaces.

2- SKID SAFE Water Based Sealer/Finish -  provides extremely high skid resistance on any surface,  it dries clear, glossy, or Satin/Matte. SKID SAFE works very well in all climates from Las Vegas hot to Alaska cold, neither salty sea water nor snow can hurt it.

3- ND AGGREGATE™  - extremely tough metallic grit that provides true traction to stop the skidding dry or wet. The grade of the grit is  #60, which is perfect size for the job of stopping slips and creating tough anti-slip floor finish. The aggregate is available in 4 colors: white, brown, green and black. Order white version for all but really dark floors. It blends real well with light colors. Most of the time it will be barely visible, or invisible when standing or sitting in a chair on the floor when lightly broadcast.

Application Involves 3 Easy Steps

application of clear non slip floor coating on slippery ceramic tiles

- Flooding of the floor for 3 minutes with SUPER BOND & CLEAN™ and thorough rinsing of all its residues afterwards
- Rolling on a coat of SKID SAFE and immediately sprinkling ND AGGREGATE™ while SKID SAFE  is still wet
- Rolling on (or spraying) additional 5 recommended coats of SKID SAFE (30-60 minutes dry time between the coats)
Whole job can easily be completed in a day. There are no unpleasant harsh fumes. Our liquids are water based, user and environment friendly. 

The floors can be used next day in a light, residential use, or can be covered with cardboard in other settings. Full cure time is 96 hours. Maintenance is easy with just a clear water or with a pH neutral floor cleaner, broom, or brush and water hose. Please read completely our directions before using our products. SKID SAFE Product Data Sheet and MSDS can be found above in the menu under Directions  and MSDSs.
 
Do not use SKID SAFE on areas that will be under standing water over 5 days, or in extremely challenged areas, like in sporting stadiums/gyms where cleats, or other sharp objects are used.

clear non slip floor coatings finish for ceramic tiles, porcelain tiles, limestone

Order Now

Small Kit

Non Slip Skid Safe System™ For Tile, Porcelain, Brick Or Limestone

Regular Gloss or Satin/Matte

Treats about 75 sq.ft. of Ceramic Tiles or Porcelain; or about 42 sq.ft. of Brick or Limestone

Contains:
1 Quart SKID SAFE
1 lb ND AGGREGATE™
1 Quart SUPER BOND & CLEAN™

Price: $111.00

100% Money Back Guarantee

Order Now

Medium Kit

Non Slip Skid Safe System™ For Tile, Porcelain, Brick Or Limestone

Regular Gloss or Satin/Matte

Treats about 300 sq.ft. of Ceramic Tiles or Porcelain; or about 170 sq.ft. of Brick or Limestone

Contains:
1 Gallon SKID SAFE
2 lbs ND AGGREGATE™
1 Gallon SUPER BOND & CLEAN™

Price: $226.00 

Five-Year Warranty*

Order Now

Large Kit

Non Slip Skid Safe System™ For Tile, Porcelain, Brick Or Limestone

Regular Gloss or Satin/Matte

Treats About 1,500 Sq.ft. Of Ceramic Tiles Or Porcelain; Or About 850 Sq.ft. Of Brick Or Limestone

Contains:
1 X 5 Gallon Pail SKID SAFE
10 lbs ND AGGREGATE™
4 Gallons of SUPER BOND & CLEAN™

Price: $915.00

Five-Year Warranty*

Order Now

IMPORTANT

Always test our products on a small area first to ensure adequate surface preparation, compatibility and desired results. Do not use SKID SAFE on areas that will be under standing water over 5 days. Do not use SKID SAFE in extremely challenged traffic areas, like in sporting stadiums/gyms where cleats, or other sharp objects are used. The floor that you are going to seal should be in a sound condition without holes, cracks, water infiltration, etc. We make no claim to prevent slip/fall accidents.  Please read our Privacy Policy, Terms & Conditions for important details.

It is essential to follow all of our DIRECTIONS. Clean SKID SAFE after it has cured only with a NEUTRAL CLEANER (pH of 7).  It is commonly available in janitorial supply stores. For cleaning you can use a brush and a water hose. We do not recommend using any mops. 

100% Money Back Guarantee Including Shipping Costs

We guarantee your satisfaction when ordering our products in Quarts or smaller sizes (including all Small KITS) and 1 lb ND AGGREGATE™ for 60 Days from the date that you receive your order.*

Test Our Products With COMPLETE CONFIDENCE and NO RISK!
ALL OUR PRIMERS/SEALERS/FINISHES ARE COVERED BY 5 YEAR WARRANTY.