NO SLIP PRODUCTS

• SKID SAFE Water Based Sealer/Finish
• ND AGGREGATE™
• SUPER BOND & CLEAN™
• CONCRETE BOND & CLEAN™
• GROUT COATING SYSTEM™

NO SLIP PRODUCT KITS

Create True Traction No Slip Floor Finish With ND AGGREGATE™

GROUT COATING SYSTEM™

A unique proven solution for new or old ceramic tiles and grout problems.

Restores Old/Discolored Grout and Tiles Into New Looking Grout Lines With Extremely Slip Resistant Finish.

White Grout Coating	Grey Grout Coating	Almond Grout Coating

SIX MAIN BENEFITS of our GROUT COATING SYSTEM™:

1. Restores old tiles and grout into new looking tiles and grout lines.
2. Our Grout Colors will not discolor even after many years.
3. Tiles are highly slip resistant using SKID SAFE, and made non slip -WET and DRY-with the use of our ND AGGREGATE™. Resists staining and scuff marks.
4. Does not change the natural appearance of your new or old tiles.
5. SKID SAFE Water Based Sealer/Finish does NOT need stripping nor burnishing. Saves substantial normal maintenance costs. Easy to clean.
6. Warranted for 5 Years.

BEFORE Grout Coating	AFTER Grout Coating

Major Benefit Highlights:

• Prevents appearance problems with grout lines on new or glossy/glazed ceramic floor/wall tiles. Save a fortune on normal maintenance. End the need for cleaning grout lines again!
• Restores used ceramic tile floor/wall tiles and old grout lines to a gorgeous stunning appearance, warranted for 5 years. Avoid expensive re-grouting!
• Makes your new or glossy/glazed or worn old ceramic tiles extremely slip resistant, wet and dry: ASTM 1028 C COF= .81 DRY, COF= .77 WET as confirmed by a State of California certified independent test laboratory. Please CLICK HERE to see the test results . With SKID SAFE Water Based Sealer/Finish you will be on the right path to reduce slip/fall accidents. SKID SAFE IS VOC COMPLIANT: Only 19.6 g/l per California VOC Regulations.
• Seal your grout lines with SKID SAFE Water Based Sealer/Finish, or choose any of our three standard grout coating colors, and then seal them and the tile with SKID SAFE.
• Least costly method to beautify and maintain the beauty of your ceramic floor/wall tiles. SKID SAFE Water Based Sealer/Finish protects the GROUT COATING, grout lines and ceramic tile floor/wall from water and most chemical damages for many years.
• Your selected GROUT COATING Color will not discolor, warranted for 5 years! GROUT COATING waterproofs grout lines deep below the grout line and more.
• Beautify QUARRY TILE too with the GROUT COATING SYSTEM™ without needing our SUPER BOND & CLEAN™.
• Easy installation! Your selected GROUT COATING Color is applied over the entire pre-stripped/cleaned ceramic tile floor/wall (as opposed to application directly into each grout line). and then damp mopped off the tile 24 hours later which leaves all grout lines beautifully colored.
• GROUT COATING may be applied directly into pre-stripped/cleaned wide grout lines, and then be sealed with SKID SAFE.

Brief Overview For Using The GROUT COATING SYSTEM™:

Click here for complete directions for GROUT COATING SYSTEM™

1. The ceramic tile floor/wall is first thoroughly cleaned. Strip any sealers, or wax from tiles and from grout lines. Wait till surfaces are dry, then proceed to Step 2.
2. Apply our SUPER BOND & CLEAN™ to dry tile floor/wall exactly according to the direction. SUPER BOND & CLEAN™ will create excellent adhesion for SKID SAFE Water Based Sealer/Finish. This is required for all new or still glossy/glazed tiles, and suggested for use on used ceramic tiles. This product prevents SKID SAFE from lifting off the tiles when they are cleaned.
3. When the floor/wall is dry to the touch, apply the GROUT COATING as directed. Let the GROUT COATING dry for 24 hours.
   There Are Two Ways To Apply Our GROUT COATING:
   A. Spread it over the entire floor/wall using a squeegee, which moves much of the GROUT COATING off the tiles and into the grout lines.
   B. For wide grout lines apply directly into each grout line, or spread it over the wall with a sponge.
4. Remove GROUT COATING from the tiles leaving all grout lines sealed with new GROUT COATING Color.
5. Apply SKID SAFE to the entire tile area, a single coat at a time after each coat has completely dried to the touch-not sticky nor tacky feeling. Highest gloss is achieved with 4 coats of SKID SAFE applied.
6. Allow for recommended drying and curing of SKID SAFE and enjoy your protected and beautiful ceramic tile floor/wall bathroom etc. for many years.
7. Clean the tile floor/wall with just plain water or with a neutral cleaner. Grout cleaning is no longer any problem!

ATTENTION: Please test our GROUT COATING on a spare tile, or test in a small inconspicuous area of the tiles for suitability before proceeding with the application on your floor/wall tiles.

GROUT COATING SYSTEM™ is easy and simple to use because the GROUT COATING can be applied over the entire pre cleaned bathroom floor and/or walls. This is a major time saving factor, because the coating does not have to be laboriously applied in the every grout line, specially in situations with small tiles. After it is allowed to dry, it is then easily wiped off the tile surface with a damp cloth/mop. This leaves the coating in the grout which is then easily sealed with SKID SAFE. This system leaves no odors when used! It saves a fortune in labor costs for any maintenance firm or staff while producing a stunning new appearance for the client's bathrooms. Should grout be in good condition, then it should be sealed with SKID SAFE. This unique sealer/finish is not damaged by uric acid for very long periods of time. SKID SAFE which does not require stripping. Worn areas can be burnished, and or will accept a new application. Our GROUT COATING color does not change in appearance when it is protected by SKID SAFE. If part of your floor/wall grout has been blackened by water/mildew damage and you install our white color GROUT COATING on it, the new white color will not change on this area nor on any other area at the floor/wall. Cleaning grout from now on will be thing of past.

GROUT COATING is available in 16 oz bottles in 3 standard colors: white, grey, almond.

GROUT COATING is warranted for 5 years on ceramic tiles when applied and maintained as directed.

CHOOSE THE BEST GROUT COATING FOR YOU

About How Much Products Do I Need?

A. GROUT COATING SYSTEM™:
SUPER BOND & CLEAN™: Apply this product first. The approximate spread rate is about 100 sq.ft. per quart.
GROUT COATING: The approximate spread rate is about 87 sq.ft. per 16 oz container.
SKID SAFE: You need to apply 4 separate coats of SKID SAFE. The approximate coverage for all 4 applied coats is about 638 sq.ft. per gallon.

B. NO SLIP GROUT COATING SYSTEM™:
SUPER BOND & CLEAN™: Apply this product first. The approximate spread rate is about 100 sq.ft. per quart.
GROUT COATING: The approximate spread rate is about 87 sq.ft. per 16 oz container.
SKID SAFE: You need to apply 6 separate coats. The approximate coverage for all 6 applied coats is about 300 sq.ft. per gallon.
ND AGGREGATE™: The approximate spread rate is about 160 sq.ft. per pound of ND AGGREGATE™.

Frequently Asked Questions (FAQ):

HOW DOES IT WORK? Our proprietary GROUT COATING™ is spread over the pre-cleaned/stripped and SUPER BOND & CLEAN™ treated tiles and grout lines. After drying for 24 hours, GROUT COATING is damp mopped off the tiles leaving all grout lines coated in your chosen color. Then the tiles are sealed with our SKID SAFE Water Based Sealer/Finish to create a glossy highly slip resistant finish has proven to last for many years and does not require stripping!

WHERE CAN I USE IT? Use our GROUT COATING on any ceramic tile, new or used, shiny or dull. Do not spread it over concrete, slate, nor brick. However, you can apply it directly into the grout  lines of concrete, slate, and  brick . Then, allow the Grout Coating to dry in the grout lines for 24 hours. Seal the grout lines and substrate with 4 separate coats of SKID SAFE according to our directions. Our Grout Coating can be applied over Quarry Tile and grout lines without having to use SUPER BOND & CLEAN™ .

All grout must be UNSEALED -never sealed-and CLEAN before applying GROUT COATING. If the grout lines have ever been sealed, use a stripper to thoroughly strip any sealer or wax in the grout. If the grout is unsealed, it should be thoroughly cleaned with a NEUTRAL CLEANER. It is not necessary to try to clean dirty grout lines  to an even appearance before using our GROUT COATING! Even blackened grout lines can be coated with any of our colors of GROUT COATING without showing through or in any way affecting your selected Grout Coating Color.

HOW CAN IT BE USED? GROUT COATING is designed to be applied to both the grout and tiles simultaneously. This saves a fortune in labor compared to costly re-grouting or an application over the grout only. When dry, GROUT COATING is easily wiped off tiles yet remains in the grout. It is as easy as mopping a floor or a wall! After drying for 24 hours, it is easily damp mopped/wiped off the surface off the tiles, which leaves the GROUT COATING firmly in place in all grout lines. Now, the tiles are sealed with our proprietary SKID SAFE Water Based Sealer/Finish.

IMPORTANT CONCEPTS & COST ESTIMATES for the GROUT COATING SYSTEM™

HOW CAN I PROTECT A FLOOR TREATED WITH GROUT COATING? Seal the floor with our SKID SAFE Water Based Sealer/Finish according to the directions. This unique product that has lasted for many years under heavy foot traffic protects our GROUT COATING from all discoloration! SKID SAFE does not require stripping. To maintain high gloss of SKID SAFE wash it with just clean water or rinse it with clean water after cleaning it with dilution of a neutral cleaner.

QUESTIONS? CONTACT US NOW